how to sharpen clipper blades at home

How To Sharpen Clipper Blades At Home Comprehensive Guide

Whether you are a professional barber or you are cutting your own hair at home, a good set of electric clippers is a necessity.

A good set of clippers will keep you groomed and looking your best at all times, which is necessary in today’s environment.

This is especially true if you are working in an office environment or meeting with clients that require certain appearances.

That being said, a good set of hair clippers is truly an amazing tool to have, but they are certainly not disposable.

You might be able to use them anytime you want and some models come with some nifty features. However, it doesn’t matter how much you clean or cares for your clippers there is going to come a time when the blades dull.

Of course, they will dull less often if you care for your clippers properly, but they will dull nonetheless. And, this is why it is important to know when the blades dull and how you can go about sharpening them.

How To Sharpen Clipper Blades At Home Comprehensive Guide Reviewed

What You Are Going To Need

 Before beginning this process it is important to gather all the materials that you are going to need for this project. You don’t want to get halfway through and find that you have to run out to the local store to pick something up. Here is a list of what you are going to need.

  • Toothbrush or cleaning brush
  • Rubbing alcohol
  • Sharpening stone or a bench stone (1000 grit and 6000 grit)
  • Phillips’ Head Screwdriver
  • Oil
  • Rag

How Do You Know When The Blades Need Sharpened?

 Unfortunately, you might be surprised to learn that most individuals don’t even know how to tell when their blades are dull.

It is possible that you have been cutting your hair will dull blades for the past month and didn’t even know it. Well, in all actuality it is actually pretty easy to tell when the blades are dull. One good indication will be when you find yourself passing over the same area multiple times just to get the hair trimmed down.

Another good indication will be if the Clippers are actually pulling and tugging at the hair, rather than cutting it. This should be pretty easy to tell because it might be somewhat painful.

It is not only important to keep an eye out for the sharpness of the blades, but you want to keep an eye out of rust as well. If your blades have started to develop rust they will need a thorough cleaning immediately.

And, before the cleaning, it would probably be convenient and smart to just go ahead and give the blades a good sharpening.

Removing Your Clipper Blades

If you are going to own a set of hair clippers, you are going to need to invest in a Phillips head screwdriver. Good chances are that you probably already own one, but if not you will need to pick one up. In order to sharpen the blades, you will need to remove them.

Thankfully, the process requires nothing more than just removing the two screws located on the front of the blade. You might find that after removing the screws the blades don’t come off easily.

In the case, you can use a pair of tweezers to gently pry the blades from the base. Be gentle and careful at the same time.

Keep in mind that while you are performing this process you want to try to make a mental note of everything. Look at the position that everything is in. What components are assembled on top?

This will help you ensure that you put everything back exactly at it was. Once the blades are removed you should be looking at two different blades. A big one and a small one.

Eliminating Hair And Debris Left Behind

At this point, you will want to go ahead and remove any hair and debris that has been left behind on the blades and in between them.

This will not only preserve the longevity of the blades, but it will make the sharpening process much easier. You can use a cleaning brush or a toothbrush to remove the hair and debris.

Getting Rid Of Rust

During this process, you will want to go ahead and inspect the blades for rust as well. Rust will be pretty easy to spot. If you do have rust it will be best to go ahead and remove it.

This can easily be done by using a mixture of water and rubbing alcohol. Just try not to dilute the alcohol too much, because it will make the mixture ineffective.

The Actual Sharpening Process

 Once your blades are all cleaned and rust free you will be ready to start the actual sharpening process. This is a much easier process than sharpening a knife if you have ever done that before.

You are going to be performing this first sharpening process on the 1000 grit stone. The most important thing to remember during this process is to make sure that you are keeping the blades flat on the stone.

In fact, the only way that you can screw this up is if you don’t keep the blades flat while you are sharpening them.

You can use your thumb and index fingers to do this. You might even see some people use a magnet as a handle, but your thumbs and index fingers will work just fine.

With the blades flat on the stone run them back and forth about ten times on the stone. Make sure that you are applying gentle pressure. Make sure you are sharpening both the front and back of the blade.

Once you have sharpened the blades with the 1000 grit stone, you can polish them up with the 6000 grit stone in the same manner. The whole process shouldn’t take more than two to three minutes.

Clean And Oil The Blades

 At this point, it wouldn’t be a bad idea to go ahead and clean the aging of the blade, dry them off, and apply a little oil. After this, you will want to reassemble the clippers and give them a try.

You Might Also Like:

Learn How To Cut Hair For Beginners – The Right Steps