There is no doubt that millions of people utilize hair clippers for trimming, fading, and blending their hair at least monthly.
While these grooming tools are very affordable, they require a bit of maintenance.
This process includes everything from routine oiling to cleaning. And, this is not to mention sterilization. All of these tasks are necessary to ensure optimum performance.
Regardless of the type of hair clipper you own, routine maintenance is a necessity.
While there are several ways to approach these tasks, it is essential to utilize the cleaning solutions, brushes, and oils that are designed for hair clippers.
Below, you will discover the best way to clean and sterilize your hair clipper.
Importance Of Routine Cleaning
There are several reasons why routine cleaning is necessary. The main reason is that it ensures optimal performance.
If the head and blade are blocked with hair, it can cause the clipper to underperform. When this happens, the blade will not snip away all of the hair with each stroke. Some of the hair follicles may get stuck in the blade, resulting in pain.
Routine cleaning can also protect the most vital components of the clipper from damage, resulting in longer service life.
While no one wants to spend more time than necessary cleaning a hair clipper, it is a vital part of the maintenance process.
How Often Is Cleaning Necessary
When it comes to determining how often a hair clipper needs to be cleaned, it depends on the manufacturer. While some companies will recommend cleaning after each use, others will recommend weekly cleanings.
This is why it is crucial to take the time to read the instruction manual included with the clipper before the first use. The cleaning instructions should not be that difficult to find.
However, if this information is not available, you can always contact the manufacturer. However, you cannot go wrong with cleaning the clipper after each use, regardless of the brand.
Remove The Upper Plate
One of the first steps of cleaning a hair clipper is removing the upper plate. Removing this component is as easy as utilizing a screwdriver to remove the two small screws that are holding it in place.
After the plate is removed, be sure to place the plate and screws in a safe location to prevent misplacement. Some brands require removing the upper and bottom plate to clean the clipper fully.
Whatever the case may be, the process is very similar and will not take more than two minutes to complete.
Remove Excess Hair
Once the upper plate is removed, you will need to remove the hair that is trapped inside the blade and head.
To do this, you will need to utilize the small cleaning brush that comes with the clipper. Gently brush the excess hair out of the debris compartment before moving forward.
Sterilize Blade Plates
The best way to sterilize the blade plates is with alcohol. If the clipper is suitable for both dry and wet shaves, you can just merely poor an alcohol solution over the components to sterilize them.
For other models, it is essential only to utilize alcohol pads for the sterilization process. Allow all of the components to dry before reattaching.
If you desire a more sterile cleaning, you should allow the blade plates to sit in the alcohol solution for at least 10 minutes.
Again, it is essential to allow these components to dry before reattaching them to the clipper completely.
Reattach And Realign
Reattach the blade plate(s) to the clipper utilizing the screwdriver. Be sure to tighten the screws tightly to prevent them from slipping.
However, before you do this, you will need to realign them. Most people get on eye level to make sure the plates are correctly aligned. Only tighten the screws when the bottom and top blade plates are correctly aligned.
If you fail to complete this process correctly, the clipper will operate louder than usual, and the blades will not work correctly.
Follow Up With Oiling
Every hair clipper requires routine oiling. Doing so will ensure that all of the most vital components are operating correctly and smoothly. Most models come with a lubricate that will last for several weeks or months.
When this lubricate runs out, you will need to replace it. In most cases, the manufacturer will provide a recommendation.
If not, you will need to either contact the manufacturer or utilize a suitable alternative. Most retail stores and pharmacies carry several brands of hair clipper lubricate, so do not fret if you run out before you have time to make a replacement.
Once the blade plates are aligned and the screws tightly secure, you will need to oil them. The proper way to complete this process is to drop a few drops of the oil on the top and sides of the blades.
Do not be surprised if you end up with an oily mess, because this is normal. To remove the excess oil, it is recommended to clean the blades with an alcohol pad.
You do not need to complete the above steps to keep the hair clipper clean. It is recommended to thoroughly clean the clipper at least once a month. In the meantime, you can utilize the cleaning brush to remove as much hair from the blades as possible.
Once the excess hair is removed, you can then lubricate the top and sides of the blades. It is important to remember that this process should be completed after each use, with a full cleaning every 30 days.
To sterilize the blades, you can either pour the alcohol solution over the top of the blades or utilize an alcohol pad to wipe them down thoroughly.
Sterilizing the blades will eradicate 99.9 percent of the bacteria hiding inside the blades. If these bacteria are not destroyed, it could cause skin and scalp infections that will require antibiotics to cure.
Once you get in the habit of cleaning and sterilizing your hair clipper, it will seem like a breeze. Failing to complete these processes routinely will risk the development of skin and scalp infections.
In addition to this, it will cause your clipper to work harder, resulting in poor performance and shorter service life.