how to adjust hair clippers blades

How To Adjust Hair Clippers Blades Guide

Are you the type of individual who prepares to do things on his or her own? If so, there is a pretty good chance that you’ve purchased yourself a pair of hair clippers.

This is going to save you a significant amount of money in the long run. Just remember that owning a pair of hair clippers means that you’re going to need to be proactive.

You’ll need to make sure that the clippers are absolutely perfect and in good working condition. You’ll also need to adjust the blades from time to time. Within this guide, you’ll learn about adjusting the blades of your hair clipper.

Why Adjust The Clipper Blades?

Many people believe that it is best to leave good things alone. This is definitely true. However, there will come a point when you must adjust the clipper blades.

After all, you’re more likely going to be cleaning them from time to time. To do that, you’ll need to remove the blades.

Once you’ve done that, you’ll be required to adjust the blades to ensure that everything is perfect. At the same time, misaligned blades can create various serious problems.

They can cause the hair to be pulled. There is also a chance that the misaligned blades will leave you or your client with an oddly shaped haircut.

With this in mind, it is pertinent for pretty much everyone to learn how to adjust the clipper blades. Any time the Clippers begin making a rattling sound, you should clean and adjust the blades. Below, you’re going to learn how to do just that.

Problems Associated With Misaligned Blades

Misaligned blades can cause serious problems. They can make the clipper rattle loudly. It is also possible for misaligned blades to cause the clipper to cut awkwardly.

That could leave someone with a very embarrassing haircut. Before using your clippers, you should always give them a thorough examination to ensure that everything is in perfect condition and that the blades are aligned correctly.


First and foremost, you’ll need to remove the blades. Don’t worry. This is really the easy part. Make sure that you remove the screws. Once you’ve done that, the blades should come free.

In order to remove the screws, you’ll probably need a four-pronged screwdriver. This is something that most people will have in their garage.

Cleaning The Blades

While you have the blades off, you might as well go ahead and clean them. This will be much easier than you could ever imagine. Just use a toothbrush or the included brush to remove the hair and other debris from the blades.

This won’t take more than three or four minutes. You can also use a straw or zip tie to dislodge and remove the hair.

Exam The Blades

Before going ahead and reattaching the blades, you should take the time to examine them thoroughly. This is going to be much more important than you might imagine.

After all, you’ll want to make sure that the blades are in good condition and can still be used. Otherwise, you might need to replace the blades completely.

Make sure that the top of the blades is approximately 1/32 inches from the bottom. Just remember that this number may vary from model to model.

Gives the blades a thorough examination to ensure that they’re still in useable condition. During this stage, you’ll also want to make sure that the blades are perfectly aligned.

If they’re not, you’ll need to fix this issue right away. If they are, you’re ready to reattach the blades and align them perfectly.

Realigning The Blades

If the blades are out of alignment, you’ll need to fix the issue immediately. You can easily rectify the problem. Start by loosening the screws on the top of the clipper.

Then, you’ll want to move the blade to the correct position. Make sure everything is absolutely perfect before moving forward. Once you’ve got it right, you can go ahead and tighten the screws once again.

Be sure to turn them in the clockwise direction to ensure that they’re tight.

Realigning Oster Blades

If you have an Oster hair clipper, you’ll need to do things a little bit differently. First and foremost, you’ll need to remove the blade assembly. You might have a latch type clipper.

If this is the case, you’ll need to push the black button near the ledge until you hear a click. This will allow you to remove the blades right away.

Again, make sure that the blades have been cleaned and oiled. Once you’ve finished these crucial steps, you’ll want to make sure that the blade assembly is in perfect alignment.

Once you’ve managed to get it aligned, you can go ahead and secure everything in place. After you’ve finished, you’ll want to plug up the clipper and make sure that it doesn’t rattle when turned on.

Preventing Misalignment

It is vital to understand that alignment issues can be avoided sometimes. Proper maintenance is one of the best ways to prevent your blades from falling out of line.

First and foremost, you need to make sure that you keep the blades as clean as possible. If they are covered in hair, there is a good chance that they’re going to become misaligned pretty soon.

With that being said, you should try to clean the blades at least once or twice a month. If you use the clipper more frequently, you can clean it more often.

Oiling Is Pertinent

You should also understand that oiling the blades is downright pertinent. Every time you clean the blades, you should also add some oil to the equation.

Your clipper is going to work best when it has been oiled correctly. Be sure to use the appropriate type of lubrication. The oil that you use should be light and it should not evaporate quickly.

It is best to oil the blades after each and every use. This might seem excessive, but it is really the best way to prevent misalignment and ensure that everything is perfect.